Tnemec Logo

Since 1921, Tnemec Company, Inc. has been a leading manufacturer of high-performance architectural and industrial coatings, and that tradition continues with innovative coating formulations that protect a wide range of substrates and enhance aesthetics. From water tanks and treatment plants, to manufacturing plants, industrial facilities, and specialty architectural buildings, Tnemec coatings can be found protecting virtually all types of structures and buildings.

Tnemec’s extensive product line is backed by outstanding technical support through the company’s network of knowledgeable coating consultants..

Series 2H | Hi-Build Tneme-Gloss

High gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat..

Series 10 | Tnemec Primers

Chemically active, rust-inhibitive primer for ferrous metals. Provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as..

Series 41 | Thinners

All thinners are classified under Series 41. Product datasheets are not available for thinner products. MSDS available. For further thinning instructions, please refer to the product the thinner..

Series 43-36 | Chrome Aluminum

Metallic aluminum finish for protection against weather, heat and mild industrial fumes. Used on primed or previously-painted carbon and galvanized steel: tank exteriors, piping, equipment and..

Series 61 | Tneme-Liner

Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion service, including fuel storage, chemical containment and wastewater treatment.

Series 66 | Hi-Build Epoxoline

Industry standard for epoxy coatings for over 30 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.

Series N69 | Hi-Build Epoxoline II

An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact..

Series 73 | Endura-Shield

A coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. High build quality combines with project specific primers for two-coat, labor.

Series 90E-92 | Tneme-Zinc

Self-curing, primer/finish with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term.

Series 90-97 | Tneme-Zinc

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It’s user friendly and rapid curing so chemical- and corrosion-resistant topcoats.

Series 135 | Chembuild

High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for.

Series 1074 (or 1074U) | Endura-Shield II

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems.

Series 1075 (or 1075U) | Endura-Shield II

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems…

Go To Website