 |
Manufactures Oil/Gas Field Mach
Manufactures Fabricated Rubber Products Manufactures
Fabricated Pipe/Fitting Manufactures Hardware
Manufactures Gasket/Packing/Seals
Stuffing Boxes
Type
"X" Single
For use on wells not requiring secondary packing. The "X" Single may be used with a blowout preventer when changing packing under pressure. Available with 2", 2-1/2" and 3" lower connections. Weight appx. 60 lbs. Height above tee, 11".
Type "X" Cross Twin
For use on wells where pressure conditions require double packing against the polish rod to prevent leakage or where packing must be replaced while under pressure. Available with 2", 2-1/2" and 3" lower connections. Weight appx. 90 lbs. Height above tee, 14-1/4".
Easily changed, the retractible rubber-bonded-to-steel rams seat firmly against the polish rod. Available in tubing sizes of 2", 2-1/2" and 3" to accomodate 5/8" through 1-3/4" polish rods. Male and female connections. Weight 42 lbs. Height 9". Test pressure, 3000 PSI.
Pumping T's/Plug Valves
SBC Tees are available in two basic materials, Ductile and Aluminum "Bronze". Sizes range from 2" to 3"; slim hole from 1-1/2" to 2". Male or female type may be specified in either material. Every SBC Tee is precision machined to assure proper center alignment of tubing, stuffing box, outlet and bleeder hole.
Pipe
Repair Clamps/BOP's
Service Saddle
WP of 2500 PSIG for pipe 1" through 4" with outlet pipe size from 1/8" through 2"
Nickel-Chrome band
Pipe sizes 1/2" to 8"; clamp lengths 3", 6", 9", 12".
Nickel-Chrome band
Pipe sizes 10" to 24"; clamp lengths 3", 6", 9", 12".
Emergency Clamp
Pipe sizes 1/2" to 6"; clamp lengths 3-1/4" to 8".
Emergency Clamp
Pipe sizes 2" to 6"; clamp lengths 12" and 16".
Collar Leak Clamp - Nickel-Chrome band
Pipe sizes 1-1/2" to 6"; clamp lengths 3" to 6".
Tubing & Casing Wellheads
The SBC Wellhead meets the rugged standards and specifications of the Oil & Gas Industry while maintaining competitive pricing. SBC Wellheads are pressure tested to assure a quality product.
Flanges, Belled Nipples
Packing
New Page 1
Type
"X" SingleFor use on wells not requiring secondary packing. The "X" Single may be used with a blowout preventer when changing packing under pressure. Available with 2", 2-1/2" and 3" lower connections. Weight appx. 60 lbs. Height above tee, 11".
Type "X" Cross Twin
For use on wells where pressure conditions require double packing against the polish rod to prevent leakage or where packing must be replaced while under pressure. Available with 2", 2-1/2" and 3" lower connections. Weight appx. 90 lbs. Height above tee, 14-1/4".
Easily changed, the retractible rubber-bonded-to-steel rams seat firmly against the polish rod. Available in tubing sizes of 2", 2-1/2" and 3" to accomodate 5/8" through 1-3/4" polish rods. Male and female connections. Weight 42 lbs. Height 9". Test pressure, 3000 PSI.
Pumping T's/Plug Valves
SBC Tees are available in two basic materials, Ductile and Aluminum "Bronze". Sizes range from 2" to 3"; slim hole from 1-1/2" to 2". Male or female type may be specified in either material. Every SBC Tee is precision machined to assure proper center alignment of tubing, stuffing box, outlet and bleeder hole.
Pipe
Repair Clamps/BOP'sService Saddle
WP of 2500 PSIG for pipe 1" through 4" with outlet pipe size from 1/8" through 2"
Nickel-Chrome band
Pipe sizes 1/2" to 8"; clamp lengths 3", 6", 9", 12".
Nickel-Chrome band
Pipe sizes 10" to 24"; clamp lengths 3", 6", 9", 12".
Emergency Clamp
Pipe sizes 1/2" to 6"; clamp lengths 3-1/4" to 8".
Emergency ClampPipe sizes 2" to 6"; clamp lengths 12" and 16".
Collar Leak Clamp - Nickel-Chrome band
Pipe sizes 1-1/2" to 6"; clamp lengths 3" to 6".
Tubing & Casing Wellheads
The SBC Wellhead meets the rugged standards and specifications of the Oil & Gas Industry while maintaining competitive pricing. SBC Wellheads are pressure tested to assure a quality product.
Flanges, Belled Nipples
Packing
Casper Wyoming
Office and Warehouse
|
Farmington New Mexico
Office
|
Williston, North Dakota
Office
|